How to use Anti-static Rubber Sticky Roller correctly for efficient cleaning?

1. Understand the basic structure
Anti-static Rubber Sticky Roller is made of soft and sticky silicone material with excellent adsorption properties. It can reach hard-to-reach areas and remove deep dust, lint and dirt. The silicone material forms a tight fit when it contacts the surface and absorbs pollutants.

2. Prepare the cleaning surface
Before use, make sure there are no obvious large debris or obstacles on the surface to be cleaned to avoid damaging the roller or the surface. Hold the handle of the roller in a comfortable and firm manner to ensure that even pressure is applied during the cleaning process.

3. Start the cleaning process
Gently place the Anti-static Rubber Sticky Roller on the surface to be cleaned and roll it at an even speed and force. The silicone material will absorb dust, lint and dirt on the surface and transfer it to the surface of the roller. Roll the same area several times until the surface is completely clean.

4. Replace the cleaning surface
During the cleaning process, if you find that the surface of the roller has absorbed a lot of contaminants, you can gently tear off the contaminants on the surface to expose a new cleaning surface. This ensures that each rolling can achieve the best cleaning effect, while taking care to avoid damaging the surface of the roller.

5. Cleaning and maintaining tools
After use, the contaminants on the surface of the roller should be thoroughly removed and stored in a dry and clean place to extend the service life of the tool. Keep the tool clean and maintained to ensure that it can still perform at its best when it is used next time.